United Airlines halted departing flights across the United States on Monday evening after a widespread system outage cut off the takeoff data pilots need to fly safely. The airline fixed the problem in about 90 minutes — but not before 554 flights were delayed, just three days after a nationwide ground stop had already thrown American air travel into chaos.

The problem was not the planes. It was the numbers. United's crews could not get the takeoff data they need from dispatch — the weight and balance figures and performance calculations that determine whether a fully loaded aircraft can safely leave the runway. Without them, planes stayed at the gate. Air traffic control audio obtained by NBC Chicago captured a United crew reporting the failure: “We are having an outage where nothing is transmitting at this moment… It’s a systemwide issue. We don’t have an estimated time to where anything is going to be restored.”

What United Said

United first responded to stranded passengers on X at around 5 p.m. ET, apologizing and confirming the outage. “We’re aware of the widespread system outage, and our teams are working hard to get things back up and running as soon as possible,” the airline wrote, telling passengers to watch their flight status through the United app or at united.com.

At 5:44 p.m. ET, United confirmed the outage was hitting departing flights — and only departing flights. “We are troubleshooting a technology issue affecting departing flights. There is no impact on flights in progress, or on United Express flights. There is no indication that this is a cybersecurity-related issue,” the airline said in a statement.

Then, at 6:18 p.m. ET — roughly 90 minutes after the first reports — United said the problem was fixed. “We have resolved a technology issue that delayed flight departures. While some flights were delayed, there was no impact on flights in progress, or on United Express flights. There is no indication that this was a cybersecurity-related issue,” the airline said. United has not said what caused the outage.

How Bad The Delays Got

Even a 90-minute outage leaves a long tail. FlightAware data showed 554 of United’s flights delayed on Monday — 17 percent of the airline’s schedule. Chicago O’Hare, United’s largest hub, had 220 departing flights delayed and 211 arrivals delayed. Passengers described aircraft returning to gates after crews could not retrieve the information needed to depart, and some travelers reported being stuck on the tarmac. United’s largest European partner, Lufthansa Group, said it was not aware of the issue affecting its own flights.

Three Days After The Ground Stop

The timing is what made Monday’s outage land so hard. On Friday, November 13, the FAA issued a nationwide ground stop at about 3:30 p.m. ET after its own network became unstable — data flooded the agency’s telecommunications network at a rate of 1,000 connection attempts every 4 to 5 seconds, disrupting aircraft communications and radar feeds at 17 of its 22 Air Route Traffic Control Centers. Air traffic resumed at 8:15 p.m. that evening, but operators cancelled about 12,462 flights on Friday alone.

The FAA traced Friday’s failure to two sites: a radar site in Amarillo, Texas, and a radio communications site in El Dorado, Arkansas, where its network provider L3Harris had been deploying a new router. The agency said it had no indication Friday’s event was a cyberattack. Nothing in the reporting so far connects Monday’s United outage to the FAA’s failure — a different system, a different cause, and United has not disclosed what triggered its own outage. But for travelers, the distinction hardly matters: it was the second time in four days that American aviation simply stopped working.

It was also the second major outage of the day. Earlier on Monday, a software bug at Chase disrupted banking services, hitting customers at Chase, Bank of America and Wells Fargo. United’s outage arrived hours later, on top of an airline industry still working through Friday’s backlog.

THE STORY SO FAR

Friday, November 13, 3:30 PM ET — The FAA issues a nationwide ground stop after its network is flooded with data. Air traffic resumes at 8:15 PM, but about 12,462 flights are cancelled on Friday alone.

Monday, November 16, around 5:00 PM ET — United tells passengers on X it is aware of a “widespread system outage” as travelers report planes stuck at gates.

Monday, 5:29 PM ET — Air traffic control audio reveals United crews cannot get their takeoff numbers: “nothing is transmitting… It’s a systemwide issue.”

Monday, 5:44 PM ET — United confirms departing flights are impacted, but flights already in the air and United Express flights are not. No indication of a cybersecurity issue.

Monday, 6:11 PM ET — Lufthansa Group says its flights are unaffected. FlightAware counts 554 United flights delayed — 17 percent of the schedule.

Monday, 6:18 PM ET — United says the technology issue is resolved and departures can resume, with delays still rippling through the evening.

WHAT HAPPENS NEXT

Delays will ripple through Monday night and into Tuesday morning as United works aircraft and crews back into position — a 90-minute stoppage at a hub the size of O’Hare does not clear the moment systems come back. United has not disclosed what caused the outage, so the next thing to watch is whether the airline explains the trigger — and whether it was a one-off failure or a system that needs fixing. There was no nationwide FAA ground stop on Monday: the only ground stops listed on the FAA’s status page were at San Francisco, for low ceilings, and Austin-Bergstrom, for runway construction.

IF YOUR FLIGHT WAS AFFECTED

United’s own advice to passengers on Monday evening was to watch their flight status in the United app or on united.com — that is the first place to check before heading to the airport, because departure times were still shifting after the fix. If your plane was one of the delayed departures, keep notifications on: rebooked or re-timed flights were being updated through the app as the airline worked through the backlog.